DAK-5 (TU 2162-001-38903868-2012)

from 240.00
per 1pack without VAT

packing 10kg


One-click order
  • Exclusive development
  • Coarse fraction
  • Industrial effluent treatment

Active (activated) crushed charcoal brand DAK-5 (TU 2162-001-38903868-2012) is made by UralHimSorb Perm Adsorbent Plant from environmentally friendly raw materials (birchwood) by exposure to water vapor at a temperature of 800—950°C followed by size reduction. This grade of activated carbon was developed by the Perm Plant in 2012. The task in the development of this carbon was the following — ease of use without loss in quality (activity, moisture, ash, bulk density as per GOST 6217-74 for DAK, coarser fractional composition). The main particle size of this sorbent is from 3.6 mm to 7 mm with a predominant fraction of 5 mm. Coarse fraction and iodine activity of not less than 30% — such characteristics allow the effective use of DAK-5 in solving many problems associated with the purification of liquid media from a wide range of impurities. This carbon sorbent can be used in the treatment of industrial water, stormwater runoffs and boiler water, steam condensate at thermal power plants, for filling carbon dioxide stations, treatment of industrial effluents in river and sea ports, airports, parking spaces, in construction of highways, purification of feed, make-up and chilled water at thermal power plants.

Active crushed carbon DAK-5 is transported by any mode of transport, except by air, in covered vehicles in accordance with the rules of transportation of goods for this mode of transport. Active crushed carbon is stored in the manufacturer's packaging at clean and covered warehouses, protected from groundwater and precipitation. Transportation and storage of active crushed carbon with products that release vapors or gases into the atmosphere is not allowed.

Packaging: multilayer paper bags of 10 kg


Recommended applications:

- Carbon dioxide stations;

- Purification of return steam condensate from oil and other impurities;

- Waste and boiler water treatment;

- Stormwater runoff treatment;

- Industrial effluent treatment in river and sea ports, airports, parking spaces, etc.

Name of the indicator, unit of physical quantityNorm for technical specifications
AppearanceBlack grains without mechanical inclusions
Iodine adsorption activity,%, not less30
Total pore volume by water, cm3 / g, not lessnot rated
Bulk density, g / dm3, max240
Basic particle size, mm

3.6 mm to 7.0 mm

Fractional composition:
>7.0 mm,%, not more
than 7.0 mm-3.6 mm,%, not less
than 3.6 mm - 1.0 mm,%, not less
than<1.0 mm,%, not more


Mass fraction of ash,%, max10,0
Mass fraction of moisture,%, max10,0
Price list Feedback

Leave your feedback

 / 8

Need a consultation?

We are the sole developer and manufacturer of most wood-based activated carbons (sorbents) in Russia and CIS countries. We will tell you in detail about our products and deliver them to any point in Russia.